A model of Cellular Automata for the spatial and temporal analysis of Citrus Sudden Death with the fuzzy parameter

Citrus Sudden Death (CSD) is a disease that has affected sweet orange trees grafted on Rangpur lime in the south of Minas Gerais state and in the north of São Paulo state (Brazil). This is a worrying characteristic because the Rangpur lime responds to 85% of the Brazilian citrus rootstocks. This disease is believed to be caused by a virus transmitted by aphids (vector) of the citrus. In this work, we have adopted the Cellular Automata model (CA) to study the temporal evolution of the disease. We take into account the effect of the wind in the space covered by the aphid. To establish the relationship between the space covered by the aphid and the intensity of the wind, we have adopted the rule-based fuzzy system. Simulations were performed and compared to real data. Through the use of the mean absolute error (MAE) method, it was possible to verify a 70% of similarity between our model of data and the real one.     

Evaluation of boron removal from water by hydrotalcite-like compounds

Layered double hydroxides (LDHs) or hydrotalcite (HT)-like compounds with different kinds of metal ions (Mg-Al and Mg-Fe) in the brucite-like sheets were prepared and their adsorption properties were studied in the boron removal from aqueous solution under laboratory conditions. The hydrotalcites were synthesized by the coprecipitation method and were characterized by chemical analyses, X-ray diffraction (XRD), Fourier Transform infrared spectroscopy (FTIR) and specific surface area measurements (BET). The affinity of these materials with a mixture of B(OH)(3) and B(OH)(4)(-) was studied as a function of contact time, initial pH of the solutions, HT quantity and B concentration (adsorption isotherms). It was found that 120 min is enough time for the equilibrium state to be reached in boron adsorption. Boron removal was independent of the initial pH of the solutions because of the high buffering capacity of the LDHs. On the other hand, the adsorption capacity increases with increasing the adsorbent quantity. The adsorption isotherms, described by the Langmuir model, are of L-type, suggesting that B(OH)(4)(-) is adsorbed preferentially on HT-like materials. Besides, Mg-Al hydrotalcites showed higher adsorption capacity than Mg-Fe. We proposed that in Mg-Al hydrotalcites, the boron removal occurs by both adsorption on external surface and ion exchange, whereas for Mg-Fe it occurs only by surface adsorption. After treatment of a solution containing 5.2 mgBl(-1) with Mg-Al hydrotalcites the final boron concentration reached the recommended limit by WHO for drinking water (0.5 mgl(-1)).     

Investigation of long-term river water quality variations using different urbanization indices and assessment of common scientific perspectives of urbanization on water quality

This study investigated the water quality variation spanning 30 years (1986–2017) in 16 catchments of Hong Kong against different urbanization indices, namely, built area fraction; population; and product of population and built area fraction. Pearson correlations of three different periods of time (1988–1990, 1998–2000, and 2015–2017) indicated that water quality trends were dependent on the urbanization index. Total solids, nitrite-nitrogen, total phosphorus, electrical conductivity, dissolved oxygen, and flow rate had significant deteriorative trends (Pearson r > 0.5 and p < 0.05) with population and product of built area and population. Results also interpreted that built area fraction and product of built area and population were the worst and best indices that represented urbanization and/or its impacts, respectively. Mann-Kendall test for the entire 30 year period showed that water quality had improved with time with respect to certain water quality parameters (e.g., dissolved oxygen, ammoniacal nitrogen and total suspended solids). The results portrayed that although the urbanization of catchments had increased with time, the river water quality with respect to many parameters showed signs of improvement and the legislative measures implemented seemed to be effective in controlling pollution.     

Air pollution inhalation during acute exercise is dependent of the body mass index and ventilation of young men

Environmental Science and Pollution Research - Obesity and physical inactivity threaten human health, and both could be solved with exercise. However, a higher amount of pollutants is inhaled...     

Evaluation of copper-induced DNA damage in Vitis vinifera L. using Comet-FISH

The contamination of soils and water with copper (Cu) can compromise the crops production and quality. Fungicides containing Cu are widely and intensively used in viticulture contributing to environmental contamination and genotoxicity in Vitis vinifera L. Despite the difficulty in reproducing field conditions in the laboratory, hydroponic solutions enriched with Cu (1, 10, 25 and 50 μM) were used in forced V. vinifera cuttings to evaluate the DNA damage in leaves of four wine-producing varieties (‘Tinta Barroca’, ‘Tinto Cão’, ‘Malvasia Fina’ and ‘Viosinho’). Alkaline comet assay followed by fluorescence in situ hybridisation (Comet-FISH) was performed with the 45S ribosomal DNA (rDNA) and telomeric [(TTTAGGG)_n] sequences as probes. This study aimed to evaluate the tolerance of the four varieties to different concentrations of Cu and to determine which genomic regions were more prone to DNA damage. The comet assay revealed comets of categories 0 to 4 in all varieties. The DNA damage increased significantly (p < 0.001) with the Cu concentration. ‘Tinto Cão’ appeared to be the most sensitive variety because it had the highest DNA damage increase in 50 μM Cu relative to the control. Comet-FISH was only performed on slides of the control and 50 μM Cu treatments. Comets of all varieties treated with 50 μM Cu showed rDNA hybridisation on the head, ‘halo’ and tail (category III), and their frequency was significantly higher than that of control. The frequency of category III comets hybridised with the telomeric probe was only significantly different from the control in ‘Malvasia Fina’ and ‘Tinta Barroca’. Comet-FISH revealed partial damage on rDNA and telomeric DNA in response to Cu but also in control, confirming the high sensitivity of these genomic regions to DNA fragmentation.

     

Artisanal fisheries of the Itaparica reservoir,São Francisco River,Brazil: socioeconomic profile,environmental dynamics,and management recommendations

Currently, artisanal fisheries in fresh water reservoirs have been losing ground to commercial fish farming and a great deal of fishery resources are being threatened by human interventions, such as reservoir management and increasing net-cage aquaculture. This study aims to understand the impacts of environmental changes on fishery resources and analyse the migratory fish breeding season as a missing link for fishery management in the semi-arid area of the São Francisco River Basin. Among the 870 fishermen operating in the Pernambuco part of the Itaparica Reservoir, 10% were interviewed and affirmed that fish stocks have been compromised due to the closed fishing period’s incoherence, exotic species insertion, and changes to the river flow caused by reservoir construction and operation. A significant correlation was observed between the Reproductive Activity Index (RAI) and precipitation (p?=?0.745) as well as between the RAI and the river’s flow (p?=??0.909). This shows how important it is to consider both the semi-arid climate setting and reservoir operation in determining the closed period which should safeguard fish reproduction. Monitoring the fish reproduction period and research on the reproductive biology of native fish species is needed in the São Francisco River Basin’s different stretches in order to guarantee valuable fish stocks and fisheries maintenance. Integrated action between the fish resource users, civil society, and federal bodies/agencies is essential in order to mitigate impacts and improve fish production systems, not only in Brazil, but in other regions experiencing a similar scenario.     

E‐waste in the world today: An overview of problems and a proposal for improvement in Brazil

Environmental issues have been at the center of society's concerns for a long time. Recently, this kind of concern is growing even more due to the damage caused to the environment by electrical and electronic product waste. Based on this same concern, this work aimed to analyze, through a literature review, the production and treatment of electronic waste in today's world, with an emphasis on Brazil and China. The articles reviewed point to an increase in the production of this type of waste, in both Brazil and China, and reveal that the current processes of treatment of electronic waste mostly aim to obtain profit through the recovery of precious metals such as copper. This paper concluded that although Brazil is one of the major producers of e‐waste, more than 90% of its e‐waste has not had a proper final destination. This deficiency in e‐waste treatment in Brazil is mainly due to financial factors and the lack of a robust educational policy focused on the environment. Thus, this work suggests the implementation of an effective educational policy aimed at environmental conservation, as well as investments in research on recycling methods in Brazil, especially on the use of e‐waste as an aggregate in the manufacture of concrete.     

Storage or Run-of-river Reservoirs: Exploring the Ecological Effects of Dam Operation on Stability and Species Interactions of Fish Assemblages

Environmental Management - Water level variation has an important role in the biology of fish species, driving behavior, feeding, and reproduction both in natural and modified environments. In...     

Recovery of PET from packaging plastics mixtures by wet shaking table

Recycling requires the separation of materials appearing in a mass of wastes of heterogeneous composition and characteristics, into single, almost pure, component/material flows. The separation of materials (e.g., some types of plastics) with similar physical properties (e.g., specific gravity) is often accomplished by human sorting. This is the case of the separation of packaging plastics in municipal solid wastes (MSW). The low cost of virgin plastics and low value of recycled plastics necessitate the utilization of low cost techniques and processes in the recycling of packaging plastics. An experimental study was conducted to evaluate the feasibility of production of a PET product, cleaned from PVC and PS, using a wet shaking table. The wet shaking table is an environmentally friendly process, widely used to separate minerals, which has low capital and operational costs. Some operational variables of the equipment, as well as different feed characteristics, were considered. The results show that the separation of these plastics is feasible although, similarly to the mineral field, in somewhat complex flow sheets.